Lee.org

Oops

I tried printing a lithophane at at a 15 degree angle instead of fully upright, hoping to avoid overhangs and came up with a delicious spaghetti print! Now I’m learning about custom support plugins for Cura. Here’s what the pre-spaghetti part of the lithophane looks like :-)

My new job at Autistry Studios in San Rafael continues to be thrilling! We are working on so much with our students! What a great way to build independence!

All of these photos were taken last week!

I figured out how to use Minimum Layer Time and Lift Head in Cura. So now my pieces with small tops don’t melt. For example, my tiny 20mm tall Koala gets to keep his ears!

I made a spray can holder for Abigail so she could spray paint stuff more easily with her kid hands. Unfortunately, it broke on a layer line almost instantly :-(  I can’t think of a good fix. I printed on an angle so the collar would have more strength in the vertical direction. But now it snaps like this. I need strength in more dimensions!   I tried printing this with Gradual Infill Steps so I’d get 50% infill at the business end and 50/3 = 16.6% infill at the handle end. But that apparently wasn’t enough. :-(

I’m just going to buy it on amazon for $6!

I tried making pegboard pegs but it’s not going great. Actually, I’m proud for this being the first piece that I downloaded and modified in Tinkercad! I borrowed the design from Thingiverse. I replaced the original pegs with a 3.6mm cylinder peg on the bottom and a 3.6mm truncated torrus on the top. I was thinking that 3.7mm might fit a tiny bit better But it broke as I was mounting it. PLA is a frustratingly weak material!

I’ve printed a few fun things though! Abigail and I made a sign with her name and her camp name, Kids for the Bay. And I made her an Odd Squad badge, with a custom number on it, and painted it gold (it looks pretty good!) And I printed a few fun turtles.

There are a few pi pencil cups on the internets. Printing it so that it looks great is proving difficult! I see one on Shapeways for $50, printed all nice-like! I think I might get it.

Wouldn’t this be nice to have?

But the toothbrush holder has made it all worthwhile! Sublime in design, Useful in usefulness!

When I upgraded from my Google Pixel 3 to a Pixel 5, the Google Assistant Open-Mic Notification, AKA the Google Assistant Hotword Beep stopped working. Moreso, the instructions to turn it on using Switch Access didn’t work! Here is the fix!

Watch the video or follow instructions below.

Go to your Pixel 5’s Settings and look for “Accessibility: Accessibility” (don’t tap on the “Accessibility: Google Assistant” screen… yet!). Go to Switch Access. Turn on “Use Switch Access”, click to “Allow” it to have control of your device, click “X” in the upper right corner when it asks about choosing a switch type. At this point, the Mic-Open Notification should work but it might not! That was my case.

Go to Settings and search for “Accessibility: Google Assistant” and tap on it. You’ll be at a screen that says “Accessibility, Mic-open notification, Mic-close notification”. Both will probably be turned on. Turn both options off. Then turn them on again. That was the magic! If that doesn’t do it immediately, definitely reboot your phone and you’ll be on your way!

Now your phone should make a bell sound whenever you say “Ok Google” or “Hey Google”.

OMG, why does Windows 11 insist on combining taskbar icons??! They effing removed the option to “never combine taskbar icons”. I’ve got lots of Chrome windows open but Windows just shows the one tiny icon unless I mouse-over it.

If you google the phrase “never combine taskbar icons Windows 11”, you’ll find tens of thousands of angry people and a few third-party apps ranging from free to $10. I’ll probably get one of them but messing with the Windows UI with a third party app can be trouble in the long term.

If you’re on Windows 10 and don’t have a need to upgrade, wait a year.
Grrrrrrrrr.

7-17-22 Update: I installed ExplorerPatcher and it happily set me back to a Windows 10-like interface (complete with Never Combining the Taskbar) very easily. I just ran the setup program and…. tada! I’ve got my taskbar back! Here’s hoping shit doesn’t go south at some point.